Interstate Products Launches New Rapid Entry Spill Containment Berm

SARASOTA, Florida (May 30, 2011) – Interstate Products, Inc. (IPI), the leading manufacturer of spill containment products and the preferred source for environmental and industrial solutions announces the launch of an enhanced line of rapid entry spill containment berms.  The company’s new high performance XR-5 Berm options are manufactured with 30 millimeter XR 5 Fabric from Seaman’s Corporation and offer the highest standards of durability and spill containment.  With the XR-5 product line, IPI continues to expand deeper into the drive-through containment berm market led by its Rapid Entry Ready Berm product line and an emphasis on regulatory compliance solutions for industrial, commercial and military applications.  The new Rapid Entry Ready Berm option allows vehicles to drive over walls upon entry and exit without having to lower them first.

As the ‘authority in spill containment’ for over a decade, IPI manufactures and distributes a nearly infinite variety of portable spill containment berms that are designed to help the military and industry to comply with the regulations of 40 CFR part 112 of the Clean Water Act, also referred to as the Spill Prevention Control and Countermeasures (SPCC) regulations.  New accessory features like the XR-5 Track Mats are designed to unroll on top of the berm, are made for truck tires to drive on to protect the berm from wear and sharp objects that may be stuck in truck tires.

IPI’s Rapid Entry Ready Berm is a secondary containment solution that helps industry comply with SPCC mandates at oil, fuel and chemical storage facilities and provides release containment for petroleum products and various chemicals handled in manufacturing processes around the world.  Typical applications for the portable containment berms include containing fuel tankers during transfer operations, providing containment for above-ground storage tanks, portable generator sets and chemical and hydrocarbon storage drums.  IPI’s spill berms are able to contain thousands of gallons when required and are fast and easy to deploy and break down.  The new line also features a collapsible “L” Bracket Wall construction. The exit and entry walls are made with edges that lay almost flat on the ground so that trucks may drive in and out freely. The edge will automatically rise with the level of any spill.

In addition to providing regulatory compliance and spill remediation, the Rapid Entry Ready Berm line offers the highest quality and can be custom manufactured utilizing various structural technologies that can adapt to virtually any containment requirement.  Ideal for big for tanker trucks and fuel trucks including military and commercial applications, IPI’s drive-through spill berms allow tankers to drive in and out of the berm without lowering walls and in the event of spills it provides countermeasure and containment.  Rapid Entry Ready Berms are manufactured to exacting quality standards using heavy duty reinforced chemical-resistant fabrics to trap fuel, oil, acids, gasoline, hydrocarbons and a broad range of chemicals.  Every IPI spill berm is portable, designed for rapid deployment and is backed by an industry leading 7 year limited warranty on seams and workmanship. In addition, there is also a 10 year pro-rated warranty on cracking due to UV and mildew damage for berms manufactured using XR-5 fabric.  For detailed product information visit

Industrial Solutions Home ~ Spill Berms ~ Pillow Tanks ~ Fuel Storage Sumps ~ Industrial Supply Center ~ Weed Killers & Grounds Maintenance ~ Rust Control


Interstate Products Offers Broad Selection of Flammable Storage Cabinets

SARASOTA, Florida (May 27, 2011) – 

Interstate Products, Inc., the leading manufacturer of spill containment products and the preferred source for environmental and industrial solutions now offers the widest selection of safety storage cabinets with four leading manufactures to choose from including Justrite®, Eagle, Jamco and Securall®.  Designed to keep industrial facilities and employees safe, IPI has emerged as the premier source for products from industry leaders offering a full line of flammable liquid storage cabinets, cans and buildings to store flammables, chemicals, pesticides, paints, inks, acids, corrosives and other hazardous materials.  IPI’s selections of safety cabinets provide many of the products required to help meet compliance with OSHA regulations and local fire marshal guidelines.

A pioneer in the manufacturer of portable spill containment berms, tank berms and collapsible storage tanks, Interstate Products is also recognized as a key provider of industrial safety solutions and a best-in-class supplier of safety, flammable storage and environmental solutions for industrial, commercial and military applications.  And with IPI’s extensive array of flammable storage cabinets and containers from the world’s leading manufacturers, the company has the expertise and breadth of product selection to solve most any industrial safety and compliance concern.

For industrial applications that require innovative safety containment systems of exceptional quality and durability, IPI can consult on any project and assist in the selection of heavy duty, all welded safety cabinets, flammable cabinets, safety cans and products offering rugged design features for both outdoor and indoor storage solutions.  IPI safety storage cabinets and containers help our clients conform to various OSHA regulatory codes including, OSHA 29 CFR 1910.106 (e)(2)(ii)(b), 29 CFR 1910.106 (d)(3)(I & ii) and Uniform Fire Code 79.201.  IPI’s selection of self-closing and manual storage cabinet models will help you meet federal and OSHA regulations.  For almost two decades, Interstate Products has been the preferred choice for a variety of industrial storage, spill containment and safety compliance applications.

For more information on spill containment berms, flammable chemical and paint storage cabinets please contact Interstate Products at 3921 Sawyer Road, Sarasota, FL 34233 or call toll free1-800-474-7294 for domestic inquiries and 941-377-8610 if outside the United States. The company’s email address is and website is

Interstate Products Offers Complete Line of Non Slip Coatings

Interstate Products Offers More Variety in Non-Slip Coatings

Accident protection and safety now available in three different nonskid coatings

 SARASOTA, Florida (May 25, 2011) – Interstate Products, Inc. (IPI), the leading manufacturer of spill containment products and the preferred source for environmental and industrial solutions is now offering a wider selection of non-slip surface coatings.  A reliable solution for safety and fall prevention in factories, warehouses, universities, heavy equipment ramps, garages and other industrial applications, IPI provides a range of products that are reliable and easy to apply.

According to the IPI Product Team, “Our complete line of non-slip surface coatings produces a very hard and durable slip-resistant surface for both interior and exterior applications.  With primary formulations that include mixed aggregate, non-mix epoxy and aerosol spray-on epoxy, each are excellent for use on floor areas which are subjected to abrasive traffic, impact and/or corrosive spillage.”

IPI’s full line includes TRACTION-N-MORE, the ultimate in VOC compliant, slip proof protection & chemical resistance that is tough enough to stand up to heavy vehicular traffic – even fork lift trucks.  Each 6 gallon pail contains resin, hardener and aggregate for the strongest possible bond and skid proofing on concrete, metal, fiberglass and more.  TRACTION-N-MORE applies easily to a clean surface and is dry enough for foot traffic in 24 hours and 48 hours for vehicular traffic under normal temperatures and conditions. This 100% Epoxy Non Slip coating Kit can be used to help prevent accidents on sidewalks, ramps, trucks, production areas, driveways, basement floors, bricks and stones, steps and other industrial surfaces.

This permanent anti slip coating with its powerful industrial sand paper like finish saves down time by reducing slippery areas in any work environment even if wet or covered in liquids.  Epoxy Non Slip Coatings are available in Clear, Black, Blue, Yellow as well as custom matched floor colors.  They are low odor and easy to clean for use indoors and outdoors.

IPI also offers SAFETY SEAL PRE-MIX EPOXY, a skid proof coating that requires no mixing and makes a permanent nonskid surface with just a roller or brush; and GOOD GRIP SLIP RESISTANT EPOXY COATING, a super hard, spray-on epoxy non slip coating that quickly cures to a slip resistant surface with a rough grit that is easy to use and requires no tools or mixing of chemicals.  Facilities managers and contractors that require non slip surface solutions may call 1-800-474-7294 for ordering information and to discuss specific applications.  IPI’s entire selection of industrial solutions is available online at:

Interstate Products Introduces New Foam Wall Ready E-Z Berm

SARASOTA, Florida (May 23, 2011) – Interstate Products, Inc., the leading manufacturer of spill containment products and the preferred source for material handling equipment and industrial solutions continues to expand their spill containment berm product line with the introduction of a new, cost effective foam wall ready E-Z Berm.

This versatile new E-Z Berm offers features that make it ideal for incidental spill control. The lightweight one-piece design requires no assembly, can be deployed easily in a matter of seconds and folds down to a compact size for easy storage and transport. The E-Z Berm is ideal to use in a manufacturing plant for temporary storage of batteries, drums and maintenance parts. The compact size and portability also makes it ideal to provide immediate spill response at jobsites for leaking tanks, vehicles, equipment and machinery.

The standard E-Z Berm is manufactured using a heavy-duty reinforced nylon fabric that is ideal for containment of most common spills. Optional fabrics, such as 30 mil XR-5® geomembrane, are also available and can be matched according to specific customer requirements for spill containment. The E-Z Berm is available with either 2″ or 4″ foam sidewalls that compress and return to their original shape after pressure is applied. This unique feature allows for easy entry and exit of equipment or vehicles into the containment area.

The E-Z Berm is available in 9 standard sizes starting with the economical 2′ x 2′ and going up to 10′ x 10′ for larger applications. These berms can also be manufactured in custom sizes and shapes with personalized logos or labeling to meet the demands of virtually any containment requirement. Every E-Z Berm is built to exacting quality standards and all seams are joined using a 3″ weld to provide additional strength and durability. For additional information regarding this product including available options; or to request a sales and delivery quote please visit our website at:

Interstate Products Introduces Over 9,000 New Material Handling Products Available for Online Purchase

Sarasota, FL, – Interstate Products Inc. continues to expand their material handling equipment product line with the introduction more than 9,000 new Jamco products available for immediate purchase online.

Interstate Products is quickly becoming a preferred source for material handling equipment solutions that improve work flow and productivity. The addition Jamco, along with the enhanced matrix pricing capabilities on our web store, allows customers to easily select a variety of product options such as size, color and castor type for online purchase. Once the options and quantities are selected according to customer preferences, the pricing is automatically adjusted prior to purchase.

“We are very excited about the addition of Jamco material handling products to our constantly expanding selection of products available for online purchase,” according to Mark Dilley Director of Marketing at IPI. “Jamco is a perfect fit for IPI as their product line complements our core markets along with providing the quality, value and selection that our customers demand.” “Early customer feedback has been overwhelmingly positive and they love our matrix pricing feature that delivers a simple way to configure a material handling product to their exact requirements.”

Jamco is an industry leading manufacturer of service/utility carts, instrument carts, platform trucks, panel/divider trucks, stock trucks, box trucks, security trucks, mobile/stationary work stations, storage cabinets, shelving, and wagons. Jamco products offer superior durability, exceptional quality and the greatest value in the industry. Jamco will typically outlast and outperform competitive products because of their welded construction, the use of heaver gauge steel and a tough powder coat finish. To view and obtain additional information about all of our Jamco material handling products, please visit our website at:

About Us
Since 1996, Interstate Products, Inc. has become a global multi-brand supplier of quality environmental, maintenance and safety product solutions to industrial, commercial, institutional, military, and various government organizations. Since its inception, IPI has experienced tremendous growth fueled by our commitment to continuously add innovative new products to meet the demands of a rapidly expanding and diverse customer base. These products include safety cabinets, absorbents, environmentally friendly chemicals, material handling, safety, and containment products. In addition, IPI is also a leading manufacturer of spill containment berms and flexible storage tanks that are available in both standard and custom sizes. Information about these and other quality products can be obtained by visiting our company website at

For more information, please contact Interstate Products at 3921 Sawyer Road, Sarasota, FL 34233 or call toll free1-800-474-7294 for domestic inquiries and 941-377-8610 if outside the United States. The company’s email address is and website is

Interstate Products, Inc.
3921 Sawyer Rd.
Sarasota, FL, 34233, USA

%d bloggers like this: